Photovoltaic inspections with drones course
Get your degree in approx. 20h

You will be able to specialize in a sector with high demand for employment

Do you want to expand your training?

You have been wanting to take the step for a long time and definitely launch into expanding your training but, at the last moment, you always back down.

You think that drone thermography is too complicated, you do not master the technique, and you are very disoriented.


With our online and face-to-face training in approx. 20h you can get your degree.

thermography with drones in photovoltaic installations

Thermography with drones in photovoltaic installations allows us to carry out a very effective inspection and preventive maintenance, saving time and costs, detecting possible failures in the photovoltaic modules, being able to repair them before a major failure or stoppage of the installation occurs.

To carry out thermographic inspections with drones in photovoltaic installations, it is necessary to take into account guidelines that guarantee the quality of the measures, in order to prepare an adequate report where the appropriate correction measures for the installation are exposed, therefore training is of vital importance. and the experience of the technician who performs them.

Curso de inspecciones fotovoltaicas con drones Datadron
Curso de inspecciones fotovoltaicas con drones Placas Datadron

The use of drone thermography is an effective and innovative way to ensure the optimal operation of solar panels.

What is currently done on foot with a handheld thermographic camera, changes considerably when it is done with drones, since inspection times are greatly reduced, not only in taking pictures, but also with the subsequent processing of images, with innovative artificial intelligence software that detects hot spots, being able to have detailed and accurate reports in a short time.

Piloto dron fotovoltaicas datadron

Student testimonial

Juan Antonio

Highly recommended course, I am a maintenance technician and recently I just finished the drone pilot course, I already knew the thermography technology in electrical installations and applied in drones is infinitely superior.


Very satisfied with the course. The program is well structured and the content is well explained.

They are good professionals and very friendly.

I recommend it 100%


I am renewable energies technician and this course has expanded my knowledge and expectations. I liked the practical part a lot, we used several different drone models.

How is the Course of photovoltaic inspections with drones?

1. Course Goal

Train pilots specialized in photovoltaic inspections with drones, providing them with the knowledge and skills so that they can meet the needs that the sector currently demands.

2. Who is the course aimed at?

To all those people who work in renewable energy areas or those who want to go a step further and specialize in a sector with high demand for employment. It is also an added value in the CV of all those who want to professionalize in this sector.

3. Requirements for the completion of the course

Although it is not mandatory to take the course, it would be necessary to provide the service, so we recommend being a Professional Drone Pilot, since in the practices the students will pilot professional drones. Another necessary requirement is to be over 18 years old.

4. How is the course structured?

  • Theoretical part carried out online through our digital platform and another face-to-face practical part.
  • The online part consists of two different modules with an estimated duration of 10h.
  • Face-to-face online. Before going to fly, the day of the practices will dedicate 2 hours for the acquisition of data.
  • Practical part . It lasts for a full intensive day. Consisting of two parts, data collection with a drone in flight over the photovoltaic plant applying the previously created mission and another part of analysis of images and data obtained in the classroom.

  • The drones used are:

  • DJI Mavic 2 Enterprise Dual
  • DJI Matrice 300 RTK with H20T camera
5. Course program

1. What is photovoltaic energy?
2. How is the industrial sector in Spain and the world?
3. Main players (companies) in the photovoltaic sector.
4. Components of a photovoltaic installation.
5. Types of photovoltaic modules.
6. Types of photovoltaic installations.
7. Distribution of a photovoltaic installation.
8. How to inspect a photovoltaic installation?
9. How to plan a photovoltaic inspection?
10. Programs to plan a photovoltaic inspection.
11. Points to consider before conducting the inspection.
12. Equipment: Drones and sensors to use.
13. Inspection of a photovoltaic installation. Practical session.
14. Data and image processing.
15. Analysis of data and images.
16. Generation of the report for the client.

6. Place of practices

The practices will be carried out in a photovoltaic plant located in the municipality of Arico in Tenerife.




Specialize in the field of photovoltaic inspections.



Sector with high demand for employment.



You will be able to carry out inspections of a photovoltaic installation.



Processing of the images and data captured with the drone.



Analysis of the images and data captured by the drone.



Generation of reports for the client.

Limited places
Hurry up. Sign up now!


1. Access to the digital platform.

2. Practices in a photovoltaic plant.

3. Diploma at the end of the course 

Now for only 550€

Between 4 and 6 jobs you will have amortized it!

registration form

After purchasing the course, fill in the following form to enroll in the drone photovoltaic inspections course. 

7 + 1 =

We recommend that, before providing us with your personal data, you read the following information:

GMPD (General Data Protection Regulation)

Compliance with the RGPD (General Data Protection Regulation)

* In order to comply with the new Data Protection Law and keep your data safe, you must read and accept our legal terms and conditions.



– Responsible party: DATADRON, S.L.

– Purpose of the data: To attend to the request or consultation formulated by the interested party.

– Legitimation: Your consent that you want to communicate with us.

– Legitimation: Your consent that you want to communicate with us.

– Data storage: Database hosted by Profesionalhosting


– Rights: Under the legal conditions, you have the right to access, rectify and delete the data, to the limitation of its processing, to oppose its processing and to its portability.

Additional information: You can consult additional and detailed information on Data Protection here: link


If you just want information about the course, or any questions, press the contact button.

Do you have any questions? Here is the answer:

How do I enroll in the course?

Perform the following steps:

You need to buy the course. Press the Buy Now

button.If you pay by credit card:

Fill out the registration form. Registration form. In the form put the order number.If you pay by bank transfer:

You will receive an email, Order on hold, with instructions and the account number to make the transfer.

If you pay by bank transfer.Fill out the registration form. Registration form. In the form put the order no.

When we receive the total amount of the course you will receive an email of completed order.

When we receive the total amount of the course you will receive an email of completed order.

What is the payment method for the course?
  • By credit card, through our payment gateway.
  • By Bank transfer.

Once the purchase is formalized on the web, you will receive an email, Order awaiting confirmation, with instructions and the account number to enter the amount of the course.

You have a period of 5 business days to transfer the course.
If you do not make the transfer within that period, we will cancel your registration.
When making your transfer you have to put:
In beneficiary: Datadron S.L.
In concept: Order number + Name and Surname
After making your transfer, I sent the receipt by mail to the email account [email protected]

Is there a maximum time to complete the course?


The student has a maximum period of 6 MONTHS to complete the evaluation of the entire course (theory and practice), counted from the day after the start of the course. If this period is exhausted without having passed the course, she may re-enroll, paying the amount of 200 euros within 7 days after the end of the 6 months. After this second period of 7 days, you must pay the full registration fee to restart the course. Force majeure cases will be assessed so as not to have to make the extra payment of 200 euros.

Once the online assessment is completed, the student must attend the mandatory face-to-face session required in Appendix I of AESA, which includes the theoretical face-to-face exam and the mandatory theoretical-practical face-to-face exam, consisting of multiple choice questions. In the event that the student does not pass in the three attempts provided for each exam, she must attend a new face-to-face session, under the same conditions.

For the face-to-face practical part, a minimum of 4 students per course will be needed.

The student will be informed of the face-to-face session that suits him best, among those that are being convened, he may also ask for the closest call as he completes the online theory, provided that he meets the established conditions and there are places available.

Once the course has been passed or the 6 MONTH period has ended without having passed it, the contractual relationship with the student will be terminated, if the enrollment has not been renewed in the stipulated time.

Once the student accesses the web platform that supports the course for the first time, it is considered that she has used the contracted service for the purpose of requesting a refund of the registration fee.

Does it include support to answer questions?
Of course.

The student has tutoring via email and the course forums, which will be attended by the instructors.


What degree will you receive at the end of the course?

Once all the online and face-to-face evaluation has been approved, DATADRON S.L. and Preolix will issue the corresponding certificate of aptitude.